Park Ridge — Art. 22 Property Maintenance Code § 22-7-2

HEATING DEVICES VENTED

In Force
Verified 11/10/2026 · Next check 12/10/2026
Park RidgeHabitability & Repair

Operative Text

Park Ridge — Art. 22 Property Maintenance Code § 22-7-2
No owner or occupant shall install, operate or use a heating device, including hot water heating units, which employs the combustion of carbonaceous fuel, which is not vented to the outside of the structure in an approved manner, and which is not supplied with sufficient air to continuously support the combustion of the fuel. All heating devices shall be constructed, installed, and operated in such a manner as to minimize accidental burns.
Source: Legislative text reproduced verbatim
Plain English

Park Ridge Art. 22 § 22-7-2 prohibits the installation or use of any combustion-based heating device—including hot water heaters—that is not properly vented to the outside and not supplied with adequate combustion air. The rule applies to both property owners and occupants. Additionally, all heating devices must be built, installed, and operated in ways that reduce the risk of accidental burns.

Written by anthropic/claude-sonnet-4.6 · Reviewed on November 9, 2026

Plain English — not legal advice.

For Property Managers

Under Park Ridge Art. 22 § 22-7-2, compliant property operators ensure that every combustion-based heating device, including hot water heating units, is connected to an approved exterior vent and receives a continuous, adequate supply of combustion air. Operators also verify that all heating equipment is constructed and installed in a manner that minimizes burn hazards for occupants. Routine inspections and documentation of venting systems and combustion air supplies are practices commonly associated with maintaining compliance.

General guidance for property managers — not legal advice for your specific situation. Consult an attorney for advice on your case.

For Tenants

Park Ridge Art. 22 § 22-7-2 gives both owners and occupants a clear standard: combustion heating devices must be properly vented outside and supplied with sufficient air, and all heating equipment must be installed to minimize burn risks. If a tenant believes a heating device in their unit does not meet these requirements, general enforcement paths include notifying the property owner in writing, contacting the local code enforcement or building department, or reaching out to a tenant-rights organization for guidance. Documenting the condition of heating equipment—such as through photographs or written records—is a step commonly taken when raising a potential code violation.

General guidance for tenants — not legal advice for your specific situation. Consult a tenant-rights organization or attorney for advice on your case.

Generated November 9, 2026 — auto-generated, not yet human-reviewed. See /transparency for methodology.

Effective Timeline

Click on timeline segments to view historical versions.

References Out

No outbound references recorded yet for this provision.

References In

No inbound references recorded yet for this provision.

Related Rules

§ 244.260
Compliance required
§ 14.567
ADOPTED BY REFERENCE
§ 244.340
Sewer and water connections

Source Information

Snapshot SHA:
Fetched:Nov 9, 2026, 10:55 PM UTC