Oneida, N.Y., Code of Ordinances ch. 77 § 77-72

Installation of equipment

In Force
Verified 11/7/2026 · Next check 12/7/2026
OneidaSpecific Conditions

Operative Text

Oneida, N.Y., Code of Ordinances ch. 77 § 77-72
Where heat-producing equipment is installed on or adjacent to combustible materials, the location, insulation, clearance and the control of the equipment shall be such that the temperature on the surface of the combustible materials will not exceed a safe temperature.
Source: Legislative text reproduced verbatim
Plain English

Oneida, N.Y., Code of Ordinances ch. 77 § 77-72 establishes a performance standard for heat-producing equipment installed near combustible materials. The rule requires that the placement, insulation, clearance, and controls of such equipment be configured so that the surface temperature of any adjacent combustible material stays within a safe range. Rather than specifying exact distances or materials, the provision focuses on the outcome: combustible surfaces must not reach unsafe temperatures.

Written by anthropic/claude-sonnet-4.6 · Reviewed on November 7, 2026

Plain English — not legal advice.

For Property Managers

Under ch. 77 § 77-72, property operators who install or maintain heat-producing equipment near combustible materials are generally expected to verify that location, insulation, clearance, and equipment controls collectively keep combustible surface temperatures at safe levels. Compliant operators typically document installation specifications, follow applicable manufacturer guidelines and building codes, and schedule routine inspections to confirm that thermal conditions remain within safe limits. Keeping records of these measures can demonstrate ongoing compliance with the provision.

General guidance for property managers — not legal advice for your specific situation. Consult an attorney for advice on your case.

For Tenants

Section 77-72 of Oneida's Code of Ordinances gives occupants a basis to raise concerns if heat-producing equipment appears to be installed too close to combustible materials in ways that could create unsafe surface temperatures. Tenants who observe such conditions may report them to the local code enforcement or building inspection office, which has authority to evaluate whether the installation meets the standard set by this provision. Tenant-rights organizations can also help residents understand how to document and communicate these concerns to the appropriate authorities.

General guidance for tenants — not legal advice for your specific situation. Consult a tenant-rights organization or attorney for advice on your case.

Generated November 7, 2026 — auto-generated, not yet human-reviewed. See /transparency for methodology.

Effective Timeline

Click on timeline segments to view historical versions.

References Out

No outbound references recorded yet for this provision.

References In

Rules and statutes that cite this regulation

Oneida Code § 77-12
Oneida Code § 77-88
Oneida Code § 77-17
Oneida Code § 77-20
Oneida Code § 77-32
Oneida Code § 77-34
Oneida Code § 77-25
Oneida Code § 77-26
Oneida Code § 77-32
Oneida Code § 77-34
Oneida Code § 77-4
Oneida Code § 77-32
Oneida Code § 77-32

Related Rules

§ 244.290
Dwelling plumbing facilities required
§ 244.300
Shared bath dwelling unit plumbing facilities required
§ 244.310
Basement water closet

Source Information

Snapshot SHA:
Fetched:Nov 7, 2026, 10:19 AM UTC