Syracuse, N.Y., Rev. Gen. Ord. ch. 27 § 27-46
Interior finishes, trim and decorative materials
Operative Text
Interior finish materials for acoustical correction, surface insulation and decorative treatment on the surfaces of walls and ceilings, and interior trim shall be rated in accordance with their surface flame spread ratings, smoke density generated and fuel contributed as determined by tests conducted in conformity with generally accepted standards. Only rated finishes, trim, and materials shall be applied, installed and used where required based upon building construction classification and occupancy.
Syracuse Rev. Gen. Ord. ch. 27, art. 5 § 27-46 establishes that interior finish materials—including acoustical panels, insulation, decorative wall and ceiling treatments, and trim—must carry verified ratings for flame spread, smoke density, and fuel contribution. These ratings must be determined through standardized testing. The rule limits which materials may be installed to only those that meet the rating thresholds appropriate for a building's construction type and occupancy classification.
Plain English — not legal advice.
Under Syracuse Rev. Gen. Ord. ch. 27, art. 5 § 27-46, compliant property operators generally verify that any interior finish material, trim, or decorative treatment carries documented flame spread, smoke density, and fuel contribution ratings before installation. Operators typically keep records of product ratings and ensure that selected materials align with the building's construction classification and occupancy type. Routine inspections and renovation projects are common occasions to confirm that all installed materials meet the applicable rated standards.
General guidance for property managers — not legal advice for your specific situation. Consult an attorney for advice on your case.
Syracuse Rev. Gen. Ord. ch. 27, art. 5 § 27-46 is a fire-safety provision that gives occupants an interest in knowing that wall, ceiling, and trim materials in their building have been tested and rated for fire performance. If a tenant has reason to believe that unrated or non-compliant finish materials have been installed, they may consider contacting the Syracuse Code Enforcement office to inquire about an inspection. Tenant-rights organizations can also help residents understand how building code compliance intersects with habitability standards.
General guidance for tenants — not legal advice for your specific situation. Consult a tenant-rights organization or attorney for advice on your case.
Generated October 1, 2026 — auto-generated, not yet human-reviewed. See /transparency for methodology.
Effective Timeline
References Out
No outbound references recorded yet for this provision.
References In
No inbound references recorded yet for this provision.