Waterford, N.Y., Code of Ordinances ch. 134 (eCode360 ed. 2026) § 134-6

Design and installation

In Force
Verified 11/10/2026 · Next check 12/10/2026
WaterfordCO & Smoke Alarms

Operative Text

Waterford, N.Y., Code of Ordinances ch. 134 (eCode360 ed. 2026) § 134-6
A single-station smoke-detecting alarm device shall be designed and installed so as to avoid dead air space, detect smoke and activate the alarm, be reasonably free from false alarm and provide indication that the alarm is energized.
Source: Legislative text reproduced verbatim
Plain English

Section 134-6 of Waterford's Code of Ordinances establishes performance and placement standards for single-station smoke-detecting alarm devices. The rule requires that these devices be positioned and constructed to minimize dead air space, reliably detect smoke and trigger an alarm, resist false alarms, and display a signal confirming the unit is powered. It sets a baseline of functional reliability rather than specifying a particular brand or model.

Written by anthropic/claude-sonnet-4.6 · Reviewed on November 10, 2026

Plain English — not legal advice.

For Property Managers

Under Waterford Code ch. 134 § 134-6, compliant property operators generally ensure that smoke detectors are placed in locations that avoid dead air pockets — such as corners where air circulation is poor — and that each installed unit visibly indicates it is receiving power. Operators typically verify that devices are rated and positioned to minimize nuisance false alarms while still responding promptly to actual smoke. Keeping installation records and conducting periodic checks helps demonstrate ongoing compliance with the design and installation standards set out in § 134-6.

General guidance for property managers — not legal advice for your specific situation. Consult an attorney for advice on your case.

For Tenants

Section 134-6 of Waterford's Code of Ordinances gives tenants a basis to raise concerns if a smoke detector in their unit appears improperly placed, fails to show a power indicator, or generates chronic false alarms suggesting a malfunction. Tenants who believe a device does not meet the design and installation standards of ch. 134 § 134-6 may consider contacting the local code enforcement or building department to request an inspection. Tenant-rights organizations can also help residents understand what documentation or steps are generally available when a smoke alarm appears non-compliant.

General guidance for tenants — not legal advice for your specific situation. Consult a tenant-rights organization or attorney for advice on your case.

Generated November 10, 2026 — auto-generated, not yet human-reviewed. See /transparency for methodology.

Effective Timeline

Click on timeline segments to view historical versions.

References Out

No outbound references recorded yet for this provision.

References In

No inbound references recorded yet for this provision.

Related Rules

§ 26C
Certain public accommodations; automatic smoke or heat detectors
§ 26D
Definitions applicable to Secs. 26D to 26F
§ 26E
Residential buildings or structures; installation of smoke detectors

Source Information

Snapshot SHA:
Fetched:Nov 9, 2026, 11:11 PM UTC