Cal. Civ. Code § 410-38-2-2

"ASTM D 5756-02" defined

In Force
Verified 10/26/2026 · Next check 11/2/2026
effective 10/26/2026IndianaHabitability & Repair

Operative Text

Cal. Civ. Code § 410-38-2-2
Sec. 2. "ASTM D 5756-02" means ASTM D 5756-02, "Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust
by Transmission Electron Microscopy for Asbestos Mass Surface Loading", available from ASTM International, 100 Barr Harbor Drive, P.O. Box
C700, West Conshohocken, PA 19428-2959.
Source: Legislative text reproduced verbatim
Plain English

Section 410 IAC 38 § 410-38-2-2 establishes the official meaning of the term 'ASTM D 5756-02' as used within Indiana's asbestos regulations. The term refers to a specific ASTM International standard that describes a microvacuum sampling and indirect analysis method for measuring asbestos mass on dust-covered surfaces using transmission electron microscopy. By anchoring the definition to a published technical standard, the regulation ensures that any testing conducted under this framework follows a consistent, recognized methodology.

Written by anthropic/claude-sonnet-4.6 · Reviewed on October 26, 2026

Plain English — not legal advice.

For Property Managers

Property owners and managers operating under Indiana's asbestos regulations should be aware that 410 IAC 38 § 410-38-2-2 defines 'ASTM D 5756-02' as the ASTM International standard governing microvacuum dust sampling and transmission electron microscopy analysis for asbestos. Compliant operators typically ensure that any asbestos dust testing performed on their properties references this specific standard, as it sets the technical baseline for acceptable sampling and analysis procedures. The full standard document is available directly from ASTM International at the address specified in the regulation.

General guidance for property managers — not legal advice for your specific situation. Consult an attorney for advice on your case.

For Tenants

Under 410 IAC 38 § 410-38-2-2, Indiana's asbestos rules define the technical testing standard known as 'ASTM D 5756-02,' which governs how dust samples are collected and analyzed for asbestos content. Tenants who have concerns about asbestos dust in their housing may find it useful to know that this standard exists and sets the benchmark for how such testing is conducted. Tenant-rights organizations or local health agencies can be consulted to better understand how this testing standard may apply to complaints or inspections involving asbestos in residential settings.

General guidance for tenants — not legal advice for your specific situation. Consult a tenant-rights organization or attorney for advice on your case.

Generated October 26, 2026 — auto-generated, not yet human-reviewed. See /transparency for methodology.

Effective Timeline

Current
Oct 26, 2026
Click on timeline segments to view historical versions.

References Out

No outbound references recorded yet for this provision.

References In

No inbound references recorded yet for this provision.

Related Rules

§ 244.260
Compliance required
§ 14.567
ADOPTED BY REFERENCE
§ 244.340
Sewer and water connections

Source Information